赵飞燕,蔺勇

• 1:宁夏师范学院物理与电子信息工程学院

摘要(Abstract)：

为解决传统通信信号采集系统信号采集强度低的问题,设计了基于FPGA技术的多路并行通信信号采集系统。对多路并行通信信号采集模拟电路进行优化,降低信号采集过程中受到的干扰。结合模糊规则原理对多路通信信号采集流程进行简化处理;利用十字交叉路口信息采集理论设计通信系统相位采集控制,优化通信系统信号采集神经网络,实现对多路并行的信号采集。实验结果证实,基于FPGA技术的多路并行通信信号采集系统比传统系统的采集强度提高了10%以上,从而验证了系统的有效性。

关键词(KeyWords)： 自适应控制;仿真模拟;FPGA技术;通信频率;信号采集;多相位控制

Abstract:

Keywords:

基金项目(Foundation): 2015国家自然科学研究项目基金:GPU并行程序自动优化方法研究(61562070);; 宁夏师范学院校级科研项目:师范生教学技能质量评估体系中数据采集系统的设计与研究(NXSFZD1714)~~

作者(Author): 赵飞燕,蔺勇

DOI: 10.16652/j.issn.1004-373x.2018.19.007

参考文献(References)：

• [1]李言武.基于FPGA和单片机的多路信号光纤传输系统设计[J].计算机测量与控制,2016,24(2):222-224.LI Yanwu. Multi-channel signal optical fiber transmission system based on FPGA and MCU[J]. Computer measurement&control,2016,24(2):222-224.
• [2]詹从来,龙伟,丁远超,等.基于FPGA的多路数据采集与处理系统设计[J].深圳大学学报(理工版),2016,33(2):127-133.ZHAN Conglai,LONG Wei,DING Yuanchao,et al. Design of multi channel data collection and processing system based on FPGA[J]. Journal of Shenzhen University(science&engineering),2016,33(2):127-133.
• [3]李明.大数据环境下无线终端智能通信信号采集系统设计[J].电子设计工程,2017,25(16):94-98.LI Ming. Design of wireless terminal intelligent communication signal acquisition system in big data environment[J]. Electronic design engineering,2017,25(16):94-98.
• [4]喻鹏,肖大为,姬庆.基于FPGA的水下多路数据采集存储系统[J].船电技术,2016,36(10):58-60.YU Peng, XIAO Dawei, JI Qing. Multi-channel signals sampling/storage system based on FPGA[J]. Marine electric&electronic technology,2016,36(10):58-60.
• [5]李亮,方勇华,赵彦东,等.基于FPGA的红外光谱信号采集系统设计[J].大气与环境光学学报,2016,11(4):313-320.LI Liang,FANG Yonghua,ZHAO Yandong,et al. Design of infrared spectrum signal acquisition system based on FPGA[J].Journal of atmospheric and environmental optics, 2016, 11(4):313-320.
• [6]卫建华,刘琪,齐攀,等.基于FPGA的可配置时序信号发生系统设计[J].国外电子测量技术,2017,36(10):107-109.WEI Jianhua,LIU Qi,QI Pan,et al. Design of configurable timing signal generator based on FPGA[J]. Foreign electronic measurement technology,2017,36(10):107-109.
• [7]张一荻.基于FPGA的脉冲信号参数高精度测量技术研究[J].仪器仪表用户,2017,34(1):32-33.ZHANG Yidi. Research on precision measurement technology of pulse signal parameters based on FPGA[J]. Instrument user,2017,34(1):32-33.
• [8]焦佳伟,石云波,邹坤.基于FPGA和以太网的多通道数据采集系统[J].电子器件,2016(1):168-171.JIAO Jiawei, SHI Yunbo, ZOU Kun. Multi-channel data acquisition system based on FPGA and Ethernet[J]. Electron device,2016(1):168-171.
• [9]郑艳芳,唐海娣,李雪宝.基于FPGA的可调节FIR滤波器的设计与实现[J].微型机与应用,2017,36(4):29-31.ZHENG Yanfang, TANG Haidi, LI Xuebao. Design of adjustable FIR filter based on FPGA[J]. Microcomputer&its applications,2017,36(4):29-31.
• [10]汪睿琪,石守东,林宜丙.基于FPGA改进的Canny实时边缘检测系统[J].无线通信技术,2017,26(3):32-37.WANG Ruiqi,SHI Shoudong,LIN Yibing. Improved Canny real-time edge detection system based on FPGA[J]. Wireless communication technology,2017,26(3):32-37.
• [11]张婉明,李琦,李金海,等.基于ARM与FPGA的便携式GNSS信号采集回放系统设计[J].电子技术应用,2016,42(10):58-61.ZHANG Wanming, LI Qi, LI Jinhai, et al. Design of portable GNSS signal capture and playback system based on ARM and FPGA[J]. Application of electronic technique,2016,42(10):58-61.
• [12]陈丰,吴裕斌,曹丹华.基于STM32和USB虚拟串口的EEG信号采集仪设计[J].仪表技术与传感器,2016,68(12):65-68.CHEN Feng, WU Yubin, CAO Danhua. Design of EEG acquisition system based on STM32 and USB virtual serial port[J]. Instrument technique and sensor,2016,68(12):65-68.
• [13]张慧慧,孟令军,韩朝辉.基于CPCIe的重型采煤机状态监测信号采集板卡设计[J].实验室研究与探索,2017,36(3):120-124.ZHANG Huihui, MENG Lingjun, HAN Zhaohui. Heavy shearer condition monitoring data acquisition board design based on CPCle[J]. Research and exploration in laboratory,2017,36(3):120-124.
• [14] ZHANG J L, WU Q, DING Y P, et al. Techniques for design and implementation of an FPGA-specific physical unclonable function[J]. Journal of computer science&technology,2016,31(1):124-136.