基于Arduino的选择性激光烧结系统设计Design of selective laser sintering system based on Arduino
郭艳玲,郭帅,李健,刘晨,刘泰涞
摘要(Abstract)：
目前选择性激光烧结设备均为工业级产品,不仅操作过程复杂,且设备成本高昂,因此设计一种基于Arduino的选择性激光烧结系统。该系统以开源硬件Arduino DUE为控制单元,通过Arduino IDE进行程序编写,下位机可实现读取G代码从而对激光、运动、温度等进行控制实现。结果表明,采用近似于桌面级FDM设备的设计思路,在保证设备功能的前提下大幅度降低了烧结机的设备成本,而且其中的模块化粉箱在缩小设备尺寸的同时也使装卸粉箱工作更加便捷。
关键词(KeyWords)： Arduino;选择性激光烧结;步进电机驱动;定时器;模块化粉箱;设备成本
基金项目(Foundation): 国家自然科学基金资助项目(51475089);; 中央引导地方科技发展专项项目(ZY16C03)~~
作者(Author): 郭艳玲,郭帅,李健,刘晨,刘泰涞
DOI: 10.16652/j.issn.1004-373x.2018.10.014
参考文献(References)：
- [1]张剑峰,张建华,赵剑峰,等.激光快速成形制造技术的应用研究进展[J].航空制造技术,2002(7):34-37.ZHANG Jianfeng,ZHANG Jianhua,ZHAO Jianfeng,et al.Recent advances of application research in laser rapid prototyping manufacturing[J].Aeronautical manufacturing technology,2002(7):34-37.
- [2]姜凯译,郭艳玲,刘祥.选择性激光烧结用原材料研究进展[J].材料开发与应用,2010,25(5):78-81.JIANG Kaiyi,GUO Yanling,LIU Xiang.Research status of the raw material for selective laser sintering[J].Development and application of materials,2010,25(5):78-81.
- [3]史玉升,黄树槐,周祖德,等.低成本选择性激光烧结快速成形设备的设计和研制[J].中国机械工程,2000,10(11):1123-1125.SHI Yusheng,HUANG Shuhuai,ZHOU Zude,et al.Design and development of low-cost selective laser sintering equipment[J].China mechanical engineering,2000,10(11):1123-1125.
- [4]PAUL G.3D printing technology and its application[J].Anatomical sciences education,2015,10(3):430-450.
- [5]ROWE C W,KATSTRA W E,PALAZZOLO R D,et al.Multimechanism oral dosage forms fabricated by three dimensional printingTM[J].Journal of controlled release,2000,66(1):11-17.
- [6]LAM C X F,MO X M,TEOH S H,et al.Scaffold development using 3D printing with a starch-based polymer[J].Materials science&engineering C,2002,20(1):49-56.
- [7]杨继志,杨宇环.基于Arduino的网络互动产品创新设计[J].机电产品开发与创新,2012,25(1):99-100.YANG Jizhi,YANG Yuhuan.Arduino-based interactive product innovation[J].Development&innovation of machinery&electrical products,2012,25(1):99-100.
- [8]纪欣然.基于Arduino开发环境的智能寻光小车设计[J].现代电子技术,2012,35(15):161-163.JI Xinran.Design of intelligent light-seeking car based on Arduino IDE[J].Modern electronics technique,2012,35(15):161-163.
- [9]刘楚红,董镇,钱宇捷,等.基于Arduino的倒车雷达系统设计[J].现代电子技术,2014,37(17):148-150.LIU Chuhong,DONG Zhen,QIAN Yujie,et al.Design of reversing radar system based on Arduino[J].Modern electronics technique,2014,37(17):148-150.