对数螺旋锥齿轮接触强度分析Contact strength analysis of logarithmic spiral bevel gear
李强,朱琳,常云龙,刘旭
摘要(Abstract)：
对数螺旋锥齿轮接触问题属于高度非线性的复杂接触问题,在传动过程中为保证齿轮能够安全、可靠地工作,要对该齿轮进行接触强度分析,使得齿轮的最大接触应力不得超过理论允许的限度。在已有的对数螺旋锥齿轮模型的基础上进行动、静态对比接触分析,找出主、从动轮齿面接触应力的最大值并与理论值相比较,结果表明,齿面最大应力值均在应力允许范围内,满足强度要求。
关键词(KeyWords)： 对数螺旋锥齿轮;静态接触;动态接触;接触应力;强度;有限元分析
基金项目(Foundation): 内蒙古自治区自然科学基金项目(2015MS0560)~~
作者(Author): 李强,朱琳,常云龙,刘旭
DOI: 10.16652/j.issn.1004-373x.2018.21.040
参考文献(References)：
- [1]杨高炜.对数螺旋锥齿轮啮合特性研究[D].包头:内蒙古科技大学,2012.YANG Gaowei. Study on meshing characteristics of logarithmic spiral bevel gears[D]. Baotou:Inner Mongolia University of Science and Technology,2012.
- [2]庄茁,廖剑晖.基于ABAQUS的有限元分析和应用[M].北京:清华大学出版社,2009.ZHUANG Zhuo,LIAO Jianhui. Finite element analysis and application based on ABAQUS[M]. Beijing:Tsinghua University Press,2009.
- [3]朱孝录.齿轮传动设计手册[M].北京:化学工业出版社,2005.ZHU Xiaolu. Gear drive design manual[M]. Beijing:Chemical Industry Press,2005.
- [4]田明瑜.螺旋锥齿轮的三维参数化建模及强度分析[D].唐山:河北联合大学,2012.TIAN Mingyu. 3D parametric modeling and strength analysis of spiral bevel gears[D]. Tangshan:Hebei United University,2012.
- [5] CHENG Y P,LIM T C. Dynamics of hypoid gear transmission with nonlinear time-varying mesh characteristics[J]. Journal of mechanical design,2003,125(2):373-382.
- [6]曹金凤,石亦平.ABAQUS有限元分析常见问题解答[M].北京:机械工业出版社,2009.CAO Jinfeng, SHI Yiping. Frequently-asked questions of ABAQUS finite element analysis[M]. Beijing:Machinery Industry Press,2009.
- [7]闫月.对数螺旋锥齿轮静、动态接触分析[D].包头:内蒙古科技大学,2013.YAN Yue. Static and dynamic contact analysis of logarithmic spiral bevel gears[D]. Baotou:Inner Mongolia University of Science and Technology,2013.
- [8]冉兆波.螺旋锥齿轮传动强度精细分析[D].大连:大连交通大学,2007.RAN Zhaobo. Precise analysis of spiral bevel gear transmission intensity[D]. Dalian:Dalian Jiaotong University,2007.
- [9]李源,袁杰红.航空减速器螺旋锥齿轮动态啮合仿真分析[J].机械传动,2007(31):43-45.LI Yuan,YUAN Jiehong. Simulation analysis of dynamic meshing of spiral bevel gears for aircraft retarder[J]. Mechanical transmission,2007(31):43-45.
- [10]苏健,李剑锋.基于ANSYS Workbench的凸轮激波滚动活齿传动强度分析[J].机械设计与制造,2013(1):194-197.SU Jian,LI Jianfeng. Strength analysis of the moving rolling tooth transmission with cam actuating on ANSYS Workbench[J]. Mechanical design and manufacturing,2013(1):194-197.